Prix Live: recovery guide
In effect from 10 Oct 2026
How to stop the key Prix holds and take your money out of your Safe without Prix: with Safe{Wallet}, or with Blockscout if Safe{Wallet} is not available. Nothing in routes A and B goes through Prix, and the website of Prix does not need to be up.
Before anything else
- The issuers come first. If Robinhood, as the issuer of the Stock Tokens, has paused a token, blocked your Safe or burned tokens, or the issuer of USDG has frozen it, neither you nor Prix can move what that affects. Only the issuer can undo it.
- You need your own wallet, the one that owns your Safe, connected in a desktop browser. If you have lost its key, nobody, Prix included, can recover your Safe.
- You need a little ETH on Robinhood Chain in that wallet, for the network fees.
- If the chain does not load, set the RPC URL of your wallet for Robinhood Chain (chain ID 4663) to https://robinhood-rpc.publicnode.com or https://robinhood.drpc.org.
- This guide is the same for everyone. It holds no ready-made transaction data and no addresses from Prix: you copy the address of your own Safe and of your tokens from Safe{Wallet} or Blockscout. If a page or a message offers you ready-made data or an address for recovery, it is not from Prix. Do not use it.
- Save or print this guide now. It is for the day Prix cannot be reached.
When to act at once
Pause on the Hub (route A, step 1) or remove the Roles module (route A, step 2) now, before anything else, in any of these cases:
- Your Prix Live page says that someone other than Prix may be able to trade your Safe or move what it holds.
- Your page, or the Prix Live page, shows an urgent stop for every Live wallet. It means the keys Prix holds, or its account, may be exposed. The stop itself only stops what Prix does: its signing, new wallets, and the set-up and renewal files. It does not stop anyone else. If your Live wallet is already closed, remove the Roles module if it is still on your Safe.
- STOP AI answers that the calls of the day are used up. STOP AI and Close together can be used 8 times in one UTC day from your session, and the count starts again at 00:00 UTC.
- STOP AI answers that Prix could not do it, or Prix cannot be reached at all.
- Blockscout emails you about a transfer you cannot explain, or a balance of your Safe falls in a way you cannot explain.
Pausing on the Hub and removing the Roles module are transactions of your own Safe, signed by your own wallet. Neither depends on Prix.
One kind of case is different: pausing on the Hub or removing the Roles module does not undo it. When your Prix Live page says any of these, withdraw first (route A, step 3, or route B), and do not use that Safe again:
- Something changed your Safe, or acted as it, with no transaction of the Safe to show for it, or its storage holds what its lists do not show.
- The code behind your Safe is no longer the Safe version Prix checked, and you did not update or migrate the Safe yourself. If you did, Prix Live cannot run on it any more: sign Close for the wallet.
- A transaction of your Safe ran other code as the Safe, and you do not know exactly what it did.
- Do not pay into this Safe: its set-up transaction was not the batch of plain calls the set-up file holds, or the Safe changed after the set-up.
In these cases Safe{Wallet} may no longer let you send from the Safe; route B is the other way to try. If your page shows an urgent stop for every Live wallet as well, pause on the Hub too until the Safe is empty.
Route A, step 1: pause on the Hub
Pausing sets the expiry of your permission to zero, so your Safe refuses the agent address from that block on. The Roles module stays in place, and the renewal file from your Prix Live page ends the pause later. While Prix has stopped every Live wallet it gives out no renewal file, and a wallet left paused for 30 days in a row closes by itself: you then start again with a new Safe.
- Open https://app.safe.global yourself, connect your own wallet, and open your Safe on Robinhood Chain.
- Find the address of the Hub: open Transactions, then History, open your set-up transaction, and copy the address of its first action, the one named create.
- Open Apps, then Transaction Builder. Paste that address as the contract. Transaction Builder lists the functions of the contract: choose pause. It takes no inputs.
- Click Add transaction, Create Batch, Send Batch and Execute, and confirm in your wallet. Check that the network is Robinhood Chain.
If Transaction Builder does not list a function named pause for that address, do not type data by hand. Remove the Roles module instead: the next step needs no address and no file.
Route A, step 2: remove the Roles module
After this, only your own wallet can move anything in your Safe. Prix reads the removal on chain and closes your wallet in Prix Live. Prix cannot remove the module for you, and a Safe whose wallet has closed cannot be linked again.
- In Safe{Wallet}, open Settings, then Modules.
- Next to the Roles module, click the delete icon (a bin), then Remove.
- Click Execute and confirm in your wallet. Check that the network is Robinhood Chain.
Safe{Wallet} builds this transaction itself. You need no file.
Route A, step 3: withdraw
- In Safe{Wallet}, click Assets.
- Next to USDG, click Send. As the recipient, enter the address of your own wallet. Click Max, then Next.
- Check the recipient and the amount, click Execute, and confirm in your wallet.
- Do the same for each Stock Token your Safe holds.
If a token your Safe holds does not appear under Assets, open Apps, then Transaction Builder. Paste the address of the token from Blockscout (route B, step 0), choose the function transfer, enter the address of your own wallet as "to" and the amount in the smallest unit of the token as "amount", then click Add transaction, Create Batch, Send Batch and Execute.
Route B, step 0: find your Safe and your tokens on Blockscout
Blockscout, the public explorer of the chain, can call the execTransaction function of your Safe from your wallet. Your Safe accepts the call because your wallet is its only owner. This route asks you to write a few values by hand. Take your time: a call with a wrong value fails and costs only the fee.
- Open https://robinhoodchain.blockscout.com and search for the address of your Safe.
- Open the Tokens tab of your Safe. It lists each token your Safe holds. Click a token to open it, and copy the address of the token from the top of its page.
- For the exact amount: on the page of the token, open Contract, then Read contract (or Read as proxy), find balanceOf, enter the address of your Safe and click Query. The whole number it shows is the balance in the smallest unit of the token. USDG has 6 decimals; every Stock Token has 18.
Route B, step 1: the values every call uses
Open the page of your Safe on Blockscout, then Contract, then Write as proxy (or Write contract). Click Connect wallet and connect your own wallet. Find execTransaction. It has ten fields:
| Field | What to enter |
|---|---|
| to | Given in step 2 or step 3 |
| value | 0 |
| data | Given in step 2 or step 3 |
| operation | 0 |
| safeTxGas | 0 |
| baseGas | 0 |
| gasPrice | 0 |
| gasToken | The zero address: type 0x, then 40 zeros |
| refundReceiver | The zero address again |
| signatures | Type 0x, then 24 zeros, then the address of your own wallet without its leading 0x, then 64 zeros, then 01 |
The signatures value tells your Safe that the signer is the wallet sending the call. It works only when that wallet is an owner of your Safe, so nobody else can reuse it. Count the characters before you send: 0x and then 130 more.
The data value is the call your Safe makes, written as hexadecimal: 0x, then 8 characters that name the function, then one block of 64 characters for each input. A block holds an address or a number, written in hexadecimal and padded on the left with zeros to 64 characters. An address goes in without its 0x and in lower case.
To turn an amount into hexadecimal, use a calculator in programmer mode (Windows Calculator has one), or the command cast to-hex of Foundry. With Foundry installed, cast calldata writes the whole data value for you from the function and its inputs.
Route B, step 2: withdraw a token
- to: the address of the token, from step 0.
- data: 0x, then a9059cbb (the function transfer(address,uint256), the same for every ERC-20 token), then the address of your own wallet as a block of 64 characters, then the amount, in the smallest unit of the token, as a block of 64 characters.
Click Write, check in your wallet that the network is Robinhood Chain, and confirm. Do this once for USDG and once for each Stock Token your Safe holds. Each token arrives in your own wallet, and the token list of your Safe on Blockscout shows it gone.
Route B, step 3: remove the Roles module
With an empty Safe the agent address has nothing to trade. Removing the module still ends its access for good.
- Find the address of your Roles module: on the page of your Safe, open Contract, then Read as proxy (or Read contract), find getModulesPaginated, enter "start" as the sentinel described below and "pageSize" as 10, and click Query. It lists your one module.
- Call execTransaction with "to" as the address of your own Safe, and "data" as 0x, then e009cfde (the function disableModule(address,address)), then the sentinel as a block of 64 characters, then the address of your Roles module as a block of 64 characters.
The sentinel is the address Safe uses to mark the start of its list of modules: 0x, then 39 zeros, then 1. As a block of 64 characters it is 63 zeros, then 1. It is the right first input when the Roles module is the only module of your Safe, as in every Prix Live set-up.
If Blockscout shows no write functions for your Safe
Blockscout offers Write as proxy only when it knows the code behind your Safe. If it does not, Blockscout lets a signed-in user attach the interface of a contract to an address under Custom ABI in the account menu; Safe publishes the interface of SafeL2 1.5.0 in its own repository, safe-global/safe-smart-account on GitHub. Whether this works on the Blockscout of Robinhood Chain has not been checked. The remaining route is a command-line tool, such as cast send of Foundry, run with your own wallet; it is for experienced users and outside this guide.
Close the wallet in Prix Live
Closing is a signed action on your Prix Live page, named Close. The wallet you signed in with signs it, it is final, and it works from anywhere: also from a place where Prix Live is closed, and while Prix Live takes no new wallets. If the owner of the Safe has changed, the new owner signs Close from their own session. After Close, Prix does this, in this order:
- It frees the place of the wallet, hides its public page and plans nothing new.
- It cancels any trade that is signed but not sent, and waits for any trade already sent or, after a while, cancels it.
- It sends the ETH left on the agent address, less network fees and anything too small to send (about 0.00001 ETH), to the wallet that signed the statement, even if the owner of the Safe has changed since.
- It keeps the key of the agent address for 7 days after that return is final, in case more ETH arrives, and then deletes the key from its storage. For a wallet whose set-up was never verified and that had nothing worth sending, it is 1 day. The host of that storage keeps restore points for 30 days.
- You still remove the Roles module yourself, as in route A, step 2. Prix cannot.
- ETH sent to the agent address after the wallet closes, or on another network, may be lost. Your page stops showing the address as a place to send ETH the moment the wallet closes.
- A halted wallet does not recover in this version. Sign Close, or the wallet closes by itself after 14 days. Closing moves nothing in your Safe either way, and routes A and B work as for any wallet.
- If Prix has stopped operating for good, nothing in your Safe is lost to that: routes A and B do not need Prix. The ETH on the agent address is: only Prix holds its key.
- A Safe whose wallet has closed cannot be linked again. To use Prix Live again, create a new Safe.
If you suspect the key Prix holds
Prix Live has no key rotation: a wallet has one agent address for its whole life, and Prix does not replace its key. If you want another key, or suspect this one, pause on the Hub or remove the Roles module now (route A), sign Close on your Prix Live page, and set up a new Safe.
Afterwards
- Remove the Safe from your Blockscout watch list only when you no longer want its emails.
- Keep the key of your own wallet safe. It is the only key that can move what your Safe holds.
Nothing on this page reads your Safe or asks you to connect a wallet. Save or print it now: it is for the day Prix cannot be reached.